Did the toilet become clogged? If you find yourself in the difficult position of having your pelvis clogged, do not be disappointed. Clogging the toilet bowl is not easy, says Αποφράξεις Αντωνίου. But there are ways to deal with the problem without much effort. Before you trust a chemical to disassemble your toilet bowl, it is a good idea to try the following methods first. The reason; Chemicals can damage your pelvic tubing. If this happens it will create a bigger problem that you will have to face. If your pelvis is clogged, we suggest simple techniques, making use of materials you already have in your home.
If your toilet is clogged, and you have the question “how do I disassemble the toilet bowl myself?”, this article is for you!
How to disassemble the toilet bowl without chemicals?
1. Disassemble the basin with hot water
The most common and successful advice followed by those who have clogged their pelvis, is hot water. Before doing anything, it is good to cut off the water supply to the basin. Once your pelvis is clogged there is a risk of overflow. Once you prevent this from happening, you can move on with the process. Take a saucepan, fill it with water and heat it until it evaporates. When the water is ready, pour it into the basin. You let it work for a few minutes and you will notice that your problem slowly subsides. Now the basin is ready to use!
2. Use liquid dishwashing detergent
Another way to unclog your pelvis is to use liquid detergent. The specific way to unclog your pelvis is combined with the first tip. Use the hot water the way we showed you and pour 1 cup of dish detergent. You leave it to act for a few minutes. Then you pull out the cistern and the problem is solved!
3. Use a wire or hanger
It may seem strange to you to think “but how do I disassemble the toilet bowl using a hanger?” And yet we will prove to you how it is done and how it is a successful way to do it. The process is simple. Take a wire hanger and open it. Create a hook on its edge and dip it into your clogged pelvis. Use the hook in such a way as to remove any obstruction from the pelvis. Caution! The movements need to be done very carefully, so as not to injure the piping.
4. Mix soda with vinegar
Combining soda with vinegar can also help unclog your pelvis. For this step first pour plenty of water into the basin. Then pour a cup full of baking soda. Leave it on for 5 minutes and pour a cup of vinegar. At this point your mixture should act for another 10 minutes, in order to have the desired result. Heat water in a saucepan and pour it into the bowl. The last step will help any residue that prevented the basin piping from leaving.
5. Use of a suction cup
The last solution is the least common in cases where the basin is clogged. That’s why it’s used after all the others have failed. The use of a suction cup requires good handling to succeed. Also do not forget to dedicate the appropriate time to disinfect the suction cup from the sewage, after its use.
How to disassemble the toilet bowl using a suction cup? The steps of the process are as follows:
After applying the suction cup well to the pelvis, make rapid reciprocating movements downwards. In this way, a vacuum is created between the suction cup and the clogged pelvis and it will begin to unblock objects that have blocked it.
Continue the process until you hear water running inside the pipes. At this point you can remove the suction cup and disinfect it well before storing it.
We hope we have helped you answer your question “how do I unclog the toilet bowl?”. In case the problem has not been solved in any of the above ways, do not insist anymore! The problem is probably not that your toilet is clogged. The problem you are facing may be in the piping and you may make it worse if you keep trying to block it on your own.
See more about Αποφράξεις Αντωνίου:
